Hamskea Limb Clamp Kit

Hamskea Limb Clamp Kit

The Hamskea Limb Clamp Kit contains the clamp, torsion spring, 30″ D-Braid cord, and attachment screw.

5/8 Inch Limb Clamp Kit

This clamp is best served on limbs that range in width from 0.625” to 0.5”. This limb clamp was specifically designed for the narrower split limb compound bows and can be used on single limb bows in some instances. This low profile 5/8” single limb clamp fits perfectly with room to spare. With the dual bracket and screws, even pressure is applied through the clamp system. The dampening coil prevents the cord from stretching, acts as a shock absorber when the shot is fired and manages the launcher rebound. The dampening coil is mounted to the lower clamp via a separate mounting screw. Couple this with a protective sticky tape and the clamp will not damage the finish of your limb or slide. This clamp works with the VersaRest as well as other manufacturers’ limb actuated style rests.

3/4 Inch Limb Clamp Kit

This clamp is best served on limbs that range in width from 0.75” to 0.65”. It is designed to be low weight and low profile, yet still serve as a true mechanical attachment mechanism for the dampening coil and cord to your rest. The dampening coil prevents the cord from stretching, acts as a shock absorber when the shot is fired and manages the launcher rebound. With the dual bracket and screws, even pressure is applied through the clamp system. The dampening coil is mounted to the lower clamp via a separate mounting screw. Couple this with a protective sticky tape and the clamp will not damage the finish of your limb and will not slip on the limb. This clamp works with the VersaRest as well as other manufacturers’ limb actuated style rests.

1 Inch Limb Clamp Kit

This clamp is best served on limbs that range in width from 0.85” to 1.0”. It is designed to be low weight and low profile, yet still serve as a true mechanical attachment mechanism for the dampening coil and cord to your rest. The dampening coil prevents the cord from stretching, acts as a shock absorber when the shot is fired and manages the launcher rebound. With the dual bracket and screws, even pressure is applied through the clamp system. The dampening coil is mounted to the lower clamp via a separate mounting screw. Couple this with a protective sticky tape and the clamp will not damage the finish of your limb and will not slip on the limb. This clamp works with the VersaRest as well as other manufacturers’ limb actuated style rests.